Jeep Tj Steering Gear Adjustment. Turning the screw clockwise will tighten the steering, to the left will loosen it. Buy new wheels with less backspacing (4.5 or less) 3. Modify the way you drive. Rotate the stub shaft with socket 8343 from stop to stop and count the number of turns. Tightening the allen screw too much will. Center the stub shaft by rotating it from the stop 1/2 of the total amount of turns. You may find that you have to make the adjustment 2 or 3 times to get the feel you want. Ill be looking for the exact size of the allen wrench need, but. I think you'll agree with me that this is by far the cheapest and. One of the reasons stated for this is loose steering, which i have. I'm planning to adjust the steering box on my 2000 tj 4.0l manual. The steering gear only has about 90 degrees of rotation. Never hurts to start with it centered before you install the. The fsm states that you can adjust the steering gear box. The keys are 90 degrees apart, pretty hard to screw that up.
from www.northjerseyjeepclub.org
Tightening the allen screw too much will. I'm planning to adjust the steering box on my 2000 tj 4.0l manual. Never hurts to start with it centered before you install the. Turning the screw clockwise will tighten the steering, to the left will loosen it. You may find that you have to make the adjustment 2 or 3 times to get the feel you want. Ill be looking for the exact size of the allen wrench need, but. The keys are 90 degrees apart, pretty hard to screw that up. The steering gear only has about 90 degrees of rotation. Modify the way you drive. Turning the screw only a little bit, like 1/8th of a turn will have a great effect on your steering.
Jeep TJ Steering Upgrade Guide Best Kit, Stabilizer, Tie Rod
Jeep Tj Steering Gear Adjustment Tightening the allen screw too much will. The fsm states that you can adjust the steering gear box. Modify the way you drive. Buy new wheels with less backspacing (4.5 or less) 3. You may find that you have to make the adjustment 2 or 3 times to get the feel you want. Center the stub shaft by rotating it from the stop 1/2 of the total amount of turns. The steering gear only has about 90 degrees of rotation. I think you'll agree with me that this is by far the cheapest and. One of the reasons stated for this is loose steering, which i have. Turning the screw only a little bit, like 1/8th of a turn will have a great effect on your steering. Rotate the stub shaft with socket 8343 from stop to stop and count the number of turns. I'm planning to adjust the steering box on my 2000 tj 4.0l manual. Turning the screw clockwise will tighten the steering, to the left will loosen it. Tightening the allen screw too much will. Never hurts to start with it centered before you install the. The keys are 90 degrees apart, pretty hard to screw that up.
